SP8E Log Splitter
SP8E/0612
Page 13
Operating the Machine
Replace the oil cap
5HPRYHWKHWUDQVSDUHQWRLOVXPSFDSQR¿JSDJHDQG¿WWKHFDSZLWKWKHURGQR¿J
supplied in the bag attached to the Log Splitter.
Test of the engine’s rotation direction
If the motor does not run in the correct direction, invert two of the phases in the socket. Remove
the plug from the Log Splitter. Insert a slotted screwdriver with a suitably sized wedge in the slot
ORFDWHGLQWKHFRQQHFWLRQLQOHWFORVHWRWKHHOHFWULFPRWRUDVVKRZQLQ¿JSDJH([HUWLQJD
slight pressure, turn the white wheel by 180°. This operation physically inverts the poles on the
three-phase motor. Check that the motor runs in the correct direction as indicated by the arrow.
Never open the box containing the switch, or open the terminal block on
the motor.
If it is necessary to do so, have these operations carried out by an electrician.
If the fuses blow or the protection valve trips, this means that you are overloading the motor or the
electrical installation is not correctly rated. Consult an electrician.
Lighting
Lighting must be provided in the entire work area of the Log Splitter to ensure perfect visibility when
operating the machine and during maintenance and adjustments. Even when working outdoors,
WKHUHPXVWEHVXI¿FLHQWOLJKWWRZRUNVDIHO\:RUNLQJDWWLPHVZKHQLQVXI¿FLHQWOLJKWPD\UHVXOWLQ
poor visibility of the machine and its components (dawn, dusk, night) is prohibited.
!
!
