Page 13 sur 37
This device can be disengaged. It is operated by a removable operating handle coupled
to an automatic brake.
Pressing on the locking button engages the operating handle which can then be used to
wind or unwind the wire rope.
The Blocfor
™ 20R has a 18 m cable capacity (the 30R has 30m), and has two carrying
handles for easy handling..
The special consol is fixed onto one of the legs of the Tracpode by a bracket..
2. Installations
2.1 Installation of
Blocfor™ 20R/30R on the Tracpode
2.1.1 Installation of Anchorage console (figure 6)
- Adapt the position of the set square to the type of
Blocfor™ 20R/30R.
- Remove the spring pin and the spindle from the support.(figure 7).
- Remove the locknut (figure 8).
