Page 14 sur 37
- Install the support on one of the 2 legs of the Tracpode which is fitted with a pulley (9)
- Replace the spring pin and the spindle (fig. 10).
2.1.2 installation of
Blocfor™ 20R/30R
- to clamp down the wing nut (Fig.11).
- install in first le low part of Blocfor on the screw
- Retighten the locknut (1) and the wing nut (2).
- Insert the wire rope in the pulley (3).
2.2
Anchoring the Blocfor
™ to the structure
The anchorage point of the Blocfor 20R (30R) should have a minimum resistance of
10kN or conform to (EN 795).
The anchorage point of the Blocfor 20R (30R) must always be above the user, or level
with the user’s feet. It must never be below the user.
1
1
2
