TRACTEL
®
undertakes to correct, free of
charge, any design, manufacturing or mate-
rial defect recognised by our company after
examination by our technical department,
either by repair or replacement (at Tractel
®
’s
discretion) of the product acknowledged as
being defective.
NO AUTOMATIC RETURN IS PERMITTED.
The guarantee does not cover damage
resulting from incorrect use, inadequate
maintenance or handling accidents. It does
not cover normal wear and tear, ageing, the
effects of oxidation or variations of voltage
applied to electrical components. It does
not apply to the paint or surface coatings.
The guarantee only applies to original
TRACTEL
®
parts, including the chains, and
excludes all other components.
Repairs under guarantee are automatically
performed in the workshops of the manu-
facturer or his approved represen
tative.
This guarantee commitment only applies to
the cost of the parts replaced and the
labour used. Any travelling or accom
mo -
dation expenses incurred by TRACTEL
®
personnel or those of TRACTEL
®
’s appro-
ved representative at the user’s site, and
the costs of transporting the item to and
from the manufacturer’s factory or that of
his approved representative, remain the
res pon sibility of the holder of the guaran-
tee.
Parts which have been replaced become
the property of the manufacturer and must
be returned to him.
Any repair or modification work performed
by the purchaser, the user or a third party
not approved by TRACTEL
®
, automatically
invalidates the guarantee.
Repairs and replacements carried out in
accordance with the guarantee will not
extend the initial guarantee period. This
guarantee excludes any work other than
that defined above.
The performance of this guarantee
excludes any acknowledgement of liability
for damage or loss of any type.
The validity of our guarantee remains sub-
ject to the presentation of the guarantee
certificate, duly signed and dated by the
manufacturer, with the device in question. If
necessary or in the absence of the guaran-
tee certificate, it is subject to the purchase
invoice being submitted to the TRACTEL
®
network.
II - GENERAL INSTRUCTIONS
1) Receipt of the equipment
CORSO travelling trolleys are supplied in
cardboard packaging with internal packing.
When the equipment is received, carry out
a visual inspection to check that the packa-
ging is in good condition.
If there is any problem, express the usual
reservations to the carrier.
After unpacking, check that the trolley cor-
responds to your order and that the delive-
ry includes :
a) For CORSO trolleys (except 10 and
20 t models)
• Two identical side plates, each fitted with
two running wheels.
• One bar (with dual reverse thread) for
fixing the side plates and adjusting the
spacing.
• One handle for adjusting the distance
between the side plates of the trolley.
• Two securing screws on the fixing bar
• These operating and maintenance ins-
tructions.
• The CE declaration of conformity.
b) For trolleys 10 and 20 t models
• Two sides plate fitted with supporting
wheels.
• One bar for fixing the side plates and
adjusting the spacing.
• Two securing screws on the fixing bar.
• These operating and maintenance ins-
tructions.
• The CE declaration of conformity.
2) Installation
The lifetime of a trolley depends on how it is
installed. It is essential to read these ins-
tructions carefully so that you install, use
and maintain your device in a clean condi-
5
GB
