M6062M
–
04/ 2007
Always concerned to improve the quality of its products, TRACTEL SOLUTIONS S.A.S
reserves the right to modify the specifications of the equipment described in this manual.
This manual outlines all necessary instructions for the safe and the correct operation of
Charlet snatch blocks.
PRIORITY INSTRUCTIONS
Before using and maintaining this Charlet snatch b lock, for maximum safety and efficiency,
make sure these instructions are read, understood and applied b y trained users.
This manual should b e made available to every operator. Extra copies of this manual will be
supplied on request.
Technical data sheets #6054, 6061
–
6055 are also available.
Contact Tractel Solutions for any additional information.
NEVER USE FOR PERSONNEL LIFTING
Never use this snatch b lock for a load exceeding its Working Load Limit (WLL). Shock
loading or specific conditions must also be taken into account when determining the
appropriate product.
Charlet snatch blocks allow operations with a high safety level. Make sure that the people
in charge meet the safety requirements of these operations.
TRACTEL SOLUTIONS SAS disclaims all responsibility for the consequences due to
disassembly or modification of the product without prior agreement, especially in case of
original components replacement b y spare parts of other origin.
Modification or welding on this product is strictly forb idden without prior agreement from
Tractel Solutions.
For lifting applications, make sure the local applicable regulation is applied b efore using
this product.
Only use wire rope that corresponds to the snatch block characteristics.
It is strictly forb idden to either stand or walk under the load.
Never move the hanging load above or near people.
Attach the b lock to a fixed anchoring point and ensure that it can support the snatch b lock
WLL
Warn the people around during the lifting or moving of the load.
Never use a damaged pulley or if you have a doub t over its correct functioning.
Never use the pulleys in aggressive atmospheres.
When the snatch block is standing vertically on the floor, make sure it cannot tip. If the
work area is not stable, then lay the snatch b lock on its lateral side plate.
Always use the adapted individual protection equipment (gloves, safety b oots, helmet,
glasses…) during the material handlings.
Regularly examine the condition of the material (see below).
Only TRACTEL SOLUTIONS SAS genuine spare parts should be used.
GB
8
