WARNING
SKYSAFE MULTI-TIER PLATFORMS are to be used with
SKYSAFE MODULAR PLATFORMS ONLY!
DO NOT USE SKYSAFE MULTI-LEVEL PLATFORMS with
SKYSAFE KNOCKDOWN PLATFORMS
© 2005 Tractel. All rights reserved.
23
A. Before using, check structure and all parts for
proper operation and are free of damage. Do not
use a platform which is damaged or not operating
properly.
B. A platform or platform part must be immediately
removed from service and destroyed when
exposed to excessive heat, as in the case of fire,
due to loss of structural strength.
C. Decking must be free of oil, grease or slippery
material.
D. Do not use this platform if the decking surface is
damaged or has deteriorated.
E. Platform with intermediate stirrup and cantilever
ends must be configured as per label.
F. Refer to label for load capacity of platform
configuration and overhang ends in use. The total
combined weight of each worker and all materials
should not exceed the rated load. Do not overload
platform or overhang end.
G. Assemble the platform on a safe and level working
surface.
H. Do not allow unrestrained objects, such as
barrels, boxes, loose brick, tools and debris to
accumulate on decking.
I. Do not use a ladder or other items to step on to
gain higher access.
J. Never step from a suspended platform to a
building access or vice versa unless the platform
is firmly secured up along the building access and
placed in a situation being as safe as on the
ground level.
K. Do not apply impact loads to a platform. Never
attempt to straighten a deformed side rail or
decking member.
L. Do not use acids or other corrosive substances on
a platform without consulting the manufacturer for
specific instructions.
M. Do not use platform in the vicinity of electrical
circuits. (Refer to Local Regulations.)
N. Before rigging inspect the site to view any electric
appliance in the environment and in such case
consult a specialist.
NOTE: Recommendations regarding grounding
precautions may be considered.
General Instructions
Read the instruction manual delivered with this product before use!
In case of loss a new one can be obtained on request.
FIG. 23
PART # 7112A0135
FIG. 24
PART # SPLB086A
