TracVision M3 User’s Guide
14
Chapter 2 - Operation
Warning Messages on Startup
During startup, make sure none of the following warning messages
appear on the display.
If one of these messages appears, you may need
to change your antenna setup to select a different set of satellites (see
“Resetting the System to Change Setup” on page 34
simply need to update the latitude/longitude stored in the antenna (see
“Entering Latitude/Longitude” on page 22
).
Warning
Description
The average skew may not
provide adequate reception for
all installed satellites. The
satellites are too far apart from
each other in the sky.
The antenna is not able to track
one of your installed satellites
because your vessel is not
located within that satellite’s
coverage area, based on the
latitude/longitude you have
set in the antenna.
The interface box and antenna
are out of sync. Just press
ACCEPT to synchronize.
The receiver is tuned to a
channel carried by a satellite
that is not installed in the
antenna.
WARNING!
WIDE SKEW RANGE: 14
WARNING! SATELLITE
OUT OF ANTENNA RANGE
SYSTEM SAT MISMATCH
PRESS TO FIX
SAT NOT INSTALLED
