TracVision M3 User’s Guide
52
Chapter 5 - Troubleshooting
4.
Press MENUS until the display shows “CAL GYRO.”
5.
Press CHANGE until the display shows “CAL
GYRO= YES.”
6.
Press ACCEPT to start gyro calibration.
7.
Verify that the azimuth (AZ) and elevation (EL) gyros
both pass. If either gyro does not pass, retry the
calibration. If it continues to fail, please seek technical
“Technical Support” on page 57
8.
Once the gyros are calibrated, the antenna restarts.
SYSTEM RESET= NO
NEXT MENU CHANGE
CAL GYRO= NO
CHANGE ACCEPT
CAL GYRO= YES
CHANGE ACCEPT
CALIBRATING GYRO
AZ: EL:
CALIBRATION COMPLETE
AZ: PASS EL: PASS