MultiSat Control Panel Owner’s Manual
49
Chapter 4 - Menu Functions
Changing the Instant On Mode Setting
Follow the process shown in Figure 4-7 to set Instant On Mode on or
off.
When Instant On is enabled, the antenna will immediately receive
signals when the antenna is turned on, as long as the vessel/vehicle
has not moved since the antenna was last shut off. However, if the
system was turned off, and then the vessel/vehicle moved, after last
acquiring the satellite via Instant On, the antenna will undergo its
standard initialization process. This results in a brief delay.
Figure 4-7 Setting Instant On Mode On/Off
Select Next until “Set instant
on/off?” is displayed.
Set instant on/off?
Yes Next Return
instant mode: Off
On
Enter
Off
Select On or Off as required,
then select Enter.
Operations Mode?
Yes Next Return
Get Antenna Status?
Yes Next Return
Control Antenna?
Yes Next Return
Select Next until “Operations
Mode?” is displayed.
<Default Display>
Menu
