10
“Warning” Operating this equipment has the potential for flying debris to cause eye injury. Always
wear safety glasses or goggles when operating equipment. Everyday glasses or reading glasses only have
impact resistant lenses, they are not safety glasses. Be certain the safety glasses you wear meet the
appropriate standards.
1.
Close the drain valve, shown in
Figure 3
, so the tank can build up pressure.
2.
Double check the oil level to make sure it is at the proper height.
3.
Connect the compressor to the power supply.
4.
Pull the switch up to the ON position to start compressor.
Figure 3.
Drain valve location.
Pressure Regulation
Summary of Contents for MCFRC227
Page 3: ......
