Model MAST-3 Bed Frame Accessory
Revised 10/27/2016
Page
5 of 10
Step 2: Fasten rails [J] to headboard using screws [C].
Assembly Steps
Step 1: Ensure there is enough room to lay out all parts. Carefully unpack all parts and hardware
and check that everything is present and undamaged. It is helpful to have more than one person
available for assembly.
Step 3: Fasten mast [F] to rear of headboard using lag screws [A] and washers [B]. If this kit is
equipped with a ship's wheel, make sure to use the mast drilled for wheel placement.
