Product Code: 1036T /1037T/1038T
Made in China to TQB Brands Pty Ltd specifications
Page 8
Visit us at www.tqbbrands.com.au
13.
Cleaning Options:
General Cleaning:
Use only tap water at an operating temperature of 50
℃
.
Enhanced Cleaning:
Add a few drops of standard washing up liquid, liquid soap, or
detergent into the water. Other non-acidic cleaning agents can
also be used.
Note:
Any spillages should be mopped up immediately, to minimise safety hazards.
5.
STORAGE
This Ultrasonic Parts Cleaner should always be stored in a dry location on a level surface.
Disconnect 240V power supply and empty the cleaning fluid into a separate container.
6.
MAINTENANCE
Disconnect power prior to any maintenance
Inspect the general condition of the Ultrasonic Parts Cleaner checking:
-
For loose hardware
-
Misalignment of binding or parts, cracked, bent, or broken parts, and
-
Any other condition that may affect the Ultrasonic Parts Cleaners safe operation
7.
SERVICE & REPAIR
Any Ultrasonic Parts Cleaner found damaged in any way, or found to be worn or operates
abnormally should be removed from service until repaired by an authorised service agent.
Owners and / or operators should be aware that repair of this product may require
specialised equipment and knowledge. Only authorised parts, labels and decals shall be
used on this equipment. Annual inspection of the Ultrasonic Parts Cleaner is recommended
and can be made by an authorised repair facility to ensure that your equipment is in
optimum condition and that the equipment has the correct decals and safety labels
specified by the manufacturer.
