Product Code: 2806T
Made in China to TQB Brands Pty Ltd specifications
Page 4
Visit us at www.tqbbrands.com.au
ASSEMBLY, OPERATION, PREVENTITIVE MAINTENANCE
1.
FEATURES
The TradeQuip Hydraulic Garage Jack is designed for the professional automotive service
technician and automotive enthusiasts needing fast acting performance. This 2806T
professional-quality Quick Lift Low-Profile Garage Jack has a 3,000kg lift capacity and a
100mm minimum lift height for easy access under low-profile vehicles. The ball bearing-
mounted rear swivel castor wheels and wide track front wheels provide easy
maneuverability and jack stability under a load.
2.
BEFORE USE
Prior to each use conduct a visual inspection checking for abnormal conditions, such as
cracked welds, leaks, and damaged, loose, or missing parts.
•
Consult the vehicle owner’s manual to determine the location of specified lift points.
•
Be sure to set the vehicle in park with the parking brake on and wheels securely
chocked.
•
Be sure that the vehicle and the jack are on a hard, level surface.
3.
OPERATION
Raising the Vehicle
Only attachments and/or adapters supplied by the manufacturer shall be used. Lift only
on area of the vehicle as specified by the vehicle manufacturer.
1.
Ensure the jack and vehicle are on a hard level surface.
2.
Follow the vehicle manufacturer’s recommended guidelines for lifting. Engage the
parking brake and chock each wheel in both directions to prevent inadvertent
vehicle movement.
3.
Close release valve by turning end of handle clockwise until firm resistance is felt. DO
NOT OVER TIGHTEN
4.
Refer to the vehicle manufacturer owner’s manual to locate specified lifting points
on the vehicle. Centre jack saddle under lift point.
5.
Verify lift point, then pump handle to contact lift point. To lift, pump handle until
load reaches desired height.
6.
Transfer the load immediately to appropriately rated jack stands.
NEVER
use hydraulic jack as a standalone device!
ALWAYS
transfer the lifted load
IMMEDIATELY
to a pair of appropriately rated jack stands. Use one pair of jack stands per
vehicle. Rated capacity is per pair only! Do not exceed rated capacity.
