background image

GSM Electrical (Australia) Pty Ltd, Level 2 142-144 Fullarton Road, Rose Park SA 5067

www.gsme.com.au  //  Phone: 1300 301 838  //  Fax: 1300 301 778

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks  

by GSM Electrical is under license. Other trademarks and trade names are those of their respective owners.

One (1) Year Warranty
This product has been manufactured to the highest quality standards.
This product is warranted to the original purchaser and is not transferable.
The product is guaranteed to be free from defects in workmanship and parts for a period of 5 Years from the date 
of purchase. Defects that occur within this warranty period, under normal use and care will be repaired, replaced or 
refunded. The benefits conferred by this warranty are in addition to all other rights and remedies of the consumer 
under Commonwealth, State and Territory laws in relation to the goods or services to which this warranty relates and 
Australian Consumer Law. Risk in regard to the product to be repaired shall at all times remain with the Purchaser. 
The warranty is given on the condition that the product to which it applies is used for the purpose and in the manner 
intended by its construction and for no other purposes whatsoever. GSM Electrical (Australia) Pty Ltd shall not be 
responsible for damage of any kind, caused by accidents, power surges, electrical storm damage, incorrect power 
current, infestation (vermin or insect), incorrect installation, incorrect electricity or plumbing installation, improper 
use of controls or failure to use the product in accordance with the operating instructions, general misuse or abuse 
or from normal wear and tear. Any attempt by an unauthorised person to repair or tamper with the equipment shall 
render the warranty null and void.
GSM Electrical (Australia) Pty Ltd’s liability under this warranty is limited to the replacement and/or repair of the 
defective parts within the warranty period and does not extend to installation or removal of the product.  
Acceptance of liability by GSM Electrical (Australia) Pty Ltd contained herein is to the exclusion of any other remedy 
whatsoever and howsoever arising in respect of any equipment to which it applies.

January 2022 / 220110

Summary of Contents for Meerkat Bluetooth MESPBT









Reviews: