12
1. Precautions
Storage and Keeping
1. Do not expose the monitor to excessive heat or cold. The storage temperature of this device
is -30~+80℃, and the operating temperature is -20~+70 ℃. The humidity is Rh90%.
2. Never use this device near a bathtub, wash basin, kitchen, damp basement, swimming pool or
similar places.
3. Never use this device in environments with excessive moisture, dust or smoke.
4. Avoid dropping or striking this device.
5. Avoid using this device in enclosed spaces, areas with excessive vibration or subject to
severe impacts.
6. Never puncture, scratch or use abrasive cleaning materials on this device..
7. Do not place cables where they may be pinched or stepped on.
8. Leave at least a 2" space between the monitor and walls, cabinets or other objects to allow
adequate air circulation around the unit.
9. The monitor is not designed to be waterproof.
1
Operating Precautions
1. The device may be powered by a 12 or 24 volt automotive battery or vehicle electrical system
2.
Observe polarity
.
power
s
do not
Make sure all cables are connected properly.
Improper cable connections may
damage the monitor. Remove the
cable connection when you
intend to use the unit.
1. High voltage is present
within the monitor.
The opening of the case should be by professionals.
2. Do not watch the
video while driving
unless you are monitoring the rear view camera display.
Warning!
!
Occasionally, a few highlights or dark spots may occur on the LCD screen. This is a very common
phenomenon in active matrix display technology, and doesn’t necessarily indicate any defects or faults.
Never try to repair this device by yourself. In case of any problems, please turn off the display at once and
notify our company or authorized dealer. The monitor is a complex device. Any disassembly or modification
may lead to damage and void the warrantee.
!
Special Notice
(3) System
COLOR-SYS, BLUE BACK, HORIZONTAL, VERTICAL, ZOOM functions will display on the screen as illustrated
below :
SYSTEM
BLUE BACK
HORIZONTAL
VERTICAL
ZOOM
COLOR -SYS
Press CH- to select COLOR-SYS .
OPTION
SCALE
CAM1
CAM2
CAM3
CAM4
ON
NORMAL
NORMAL
NORMAL
NORMAL
LANG
ENG
Press / to select NORMAL / MIRROR.
.
SELECT
ADJUST
Press CH- to select CAM1.
SELECT
ADJUST
SYSTEM
BLUE BACK
HORIZONTAL
VERTICAL
ZOOM
COLOR -SYS
SELECT
ADJUST
Press / to select PAL / AUTO / N 443 / N 358.
.
PAL
ON
0
OPTION
SCALE
CAM1
CAM2
CAM3
CAM4
ON
NORMAL
NORMAL
NORMAL
NORMAL
LANG
ENG
Press / to select ON / OFF. Scale refers to the reversing distance indicator displayed
on the monitor.
SELECT
ADJUST
Press CH- to select SCALE.
www.xtravision.nl
