background image

17

TRAEGERGRILLS.COM   

ADDITIONAL CONTROL FUNCTIONS

SETTINGS 

Use the Settings menu to adjust display settings, clear notifications, access important product and contact 

information, and more.

TRAEGER  WiFIRE

>Keep Warm

>Auger

>Wi-fi Information

>Settings

>Back

Press Dial To Set Temp

165

°F

SETTINGS

>Speaker

>Contrast

>Probe Calibration

>Clear Notifications

>Temperature Units

TO ACCESS THE SETTINGS MENU:

Turn grill on. Once the home screen is displayed, press MENU. The main menu will display several options. Turn the dial 

to highlight “Settings.” Press the center of the dial to select.
To change a setting, turn the dial to select the desired setting. Press the center of the dial to confirm. Select Back to 

return to the Settings menu.

ABOUT GRILL

Pro 575

SW VER: 00.05.07

CONFIG VER: 04.b05

UUID: 5410EC668632

>Back

SPEAKER

Turns the grill control speaker on or off. The selected 

setting will be indicated with a *.

CONTRAST

Rotate the dial to adjust the display contrast from  

1 (high) to 5 (low). Default setting is 3. Press the center  

of the dial to confirm and return to the Settings menu.

PROBE CALIBRATION

There are two options under this setting:

1.  Calibrate Probe:  Provides instructions on calibrating 

using an ice water bath. “Place probe in ice water for  

1 minute before calibrating.” is displayed.

2.  Probe Offset: Rotate the dial to adjust the probe 

temperature offset in 1° increments, from -15°F to 

+15°F/-8°C to +8°C. The default setting is 0. Press the 

center of the dial to confirm and return to the Settings 

menu.

CLEAR NOTIFICATIONS

Use this function to clear error messages and 

notifications. 

NOTE: 

Since an error will put the grill into Cool Down 

mode, the display will still show "Cooling Down" when 

you exit the Clear Notifications and Settings menus. 

TEMPERATURE UNITS

Turn the dial to choose between degrees Fahrenheit (°F) 

and Celsius (°C). Press the center of the dial to confirm. 

The selected setting will be indicated with a *. 

CUSTOMER SERVICE

Displays the Traeger WiFIRE® dedicated customer service 

number. 

ABOUT GRILL

Provides important information about your grill, including 

model number and software version. 

BACK

Return to the main menu.

Summary of Contents for WiFiRE











Reviews: