background image

Page 18 

Copyright ©2015 Traffic Logix® Corp.         SafePace® 650: Installation Manual     V. 1.5 

 

Warranty 

 

Subject to the following conditions, Traffic Logix Corporation (“Traffic Logix”) warrants that the 
SafePace

®

 650 Speed sign (the “Product”) is free from defects in materials and workmanship. This 

limited warranty begins on the invoice date of your purchase of the Product and extends: 

 

For TWO (2) calendar years on the radar sign, and  

 

For ONE (1) calendar year on the batteries. 

This limited warranty extends only to the original purchaser of the Product when purchased either 
directly through Traffic Logix or through an authorized Traffic Logix distributor and is not assignable or 
transferable to any subsequent purchaser or end-user. Traffic Logix’s obligation and liability under this 
warranty are expressly limited to repairing or replacing, at Traffic Logix’s option, defective products. In 
no circumstances shall Traffic Logix’s liability, whether in contract or tort, under any warranty, in 
negligence, or otherwise, exceed the amount of the purchase price of the product. Traffic Logix shall not 
be liable for special, indirect, or consequential damages of any kind. This warranty does not cover 
damages resulting from normal wear and tear, incorrect installation or operation, use other than for the 
product’s intended purposes, vandalism, and extraordinary environmental circumstances. Traffic Logix 
reserves the right to charge for these damages to the product at rates normally charged for repairing 
such products not covered under this warranty. Damages resulting from any physical changes or 
alterations made to the product other than Traffic Logix will render this warranty VOID. Using any parts 
or accessories not supplied or approved by Traffic Logix, such as battery chargers, will further render the 
warranty VOID.  

 

Traffic Logix neither assumes, nor authorizes any person to assume for it, any other liability in 
connection with the sale of the Product, and there are no agreements or warranties collateral to or 
affecting this limited warranty. THE LIMITED WARRANTY SET FORTH IN THIS AGREEMENT IS THE 
EXCLUSIVE AND SOLE WARRANTY APPLICABLE TO THIS PURCHASE. ALL OTHER WARRANTIES, EXPRESS 
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND 
THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY DISCLAIMED.

 

 

Traffic Logix does not warrant that any of its products will meet or comply with the requirements of any 
applicable federal, state or local safety code, law, regulation or ordinance (“Applicable Safety Laws”). 
Buyer acknowledges that Traffic Logix’s products are to be used only in accordance with the attached 
Conditional Terms of Use and any Applicable Safety Laws. Buyer agrees that there shall be no coverage 
or benefits of any kind under this limited warranty if it is determined by Traffic Logix that the Product 

Summary of Contents for SafePace 650




















Reviews: