Mounting and Dismounting the Speed Tracker
To install the Pole Bracket using the supplied banding straps:
1.
Thread the banding straps through the banding strap holes as shown.
N
OTE
:
The banding straps included are long enough for use with a 5-inch pole. If you want to use a
larger pole, you will need to obtain longer banding straps.
2.
If necessary, use additional screws and/or bolts (in the Telspar mounting holes) to further prevent theft
and vandalism.
To install the Pole Bracket on a flat surface:
1.
Use the appropriate screws for the surface in question (for example: wood vs. concrete) and the
necessary anchors if required.
2.
Drill 4 holes on the surface in question, to match the surface mount holes on the pole bracket.
3.
If necessary insert the anchors in the holes.
4.
Position the pole bracket and secure it to the surface with the screws.
Mounting and Dismounting the Speed Tracker
After you install the mounting brackets, you can easily mount the Speed Tracker by sliding it down onto the
Pole Bracket. When the tracker is mounted, you should lock it into place.
Speed Tracker Installation Guide
p. 14