Opening and Closing the Speed Tracker Latches
Opening and Closing the Speed Tracker Latches
Your Speed Tracker comes with several over-center draw type latches. These latches help to protect the
internal components of the tracker from vandalism as well as water infiltration. As shown in the following
illustration the important components of these latches are the lever, the hook and the slot.
[Figure 15] Components of the latches
The following procedures provide details on how to use these components to properly open and close the
latches on the tracker.
W
ARNING
:
It is vitally important, whenever you close the tracker, that you close and lock
all
of the
latches properly to avoid water infiltration as this could damage the tracker and void your warranty.
To open the latch:
1.
If necessary, unlock the latch, with the supplied key.
2.
Raise the lever then lift the tip of the hook out of the slot.
To close the latch:
1.
Insert the tip of the hook into the slot as shown in the following image.
Speed Tracker Installation Guide
p. 24
