139
TRAK Machine Tools
Southwestern Industries, Inc.
ProtoTRAK SMX, K2, K3 & K4 & Retrofit Safety, Installation, Maintenance, Service and Parts List Manual
Caution!
After the quill stop knob is removed, take care that the quill is not allowed to
fall out.
8.0 Z Motor/Ball Screw Assembly
Note:
This section is for the installation of ProtoTRAK SMX 3 axis controls only.
Note:
Tram the head before beginning this procedure.
8.1 Installation of the Base Plate
Figure 66
1. Remove the mill head assemblies indicated in Figure 66.
Kit Variation: For Lagun mills, substantial modification of the mill is required. See Fig 69
Note: Reposition the quill lock handle so that it is in the back. Once the baseplate is installed, it will be difficult to get to
it.
For the microfeed assembly, remove in this
order:
1.
D, E
2.
F, G, H
3.
J
4.
K, L
