35
TRAK Machine Tools
Southwestern Industries, Inc.
ProtoTRAK SMX, K2, K3 & K4 & Retrofit Safety, Installation, Maintenance, Service and Parts List Manual
Parts List –Knee Mill Lubrication (Figure 17)
Item
P/N
Title
Qty
1
9001
HAND OILER
1
2
9002
ALUMINUM PIPE
6
3
9003
ELBOW
6
4
9004
T-JOINT - 4 HOLES- M8 X 1.0
1
5
9005
CONNECTOR
3
6
9006
REGULATING DISTRIBUTOR
1
7
9007
FLEXIBLE TUBE - 21 inches
1
8
9008
SCREW NUT - M8 X 1.0 MALE
15
9
9009
SCREW NUT - PD 1/8- 19MM
2
10
9010
SCREW - M5 X 20 mm LG
8
11
9011
SCREW NUT - M8 X 1.0 FEMALE
3
12
9012
ADAPTER
1
13
9013
SLEVE - 4.1 mm I.D.
18
i00889
2.15.2 Head Lubrication
Note
– the white head represents the K4 40 taper head.
Once Each Week:
1.
Add SAE 30 or 30W oil to the side cup on the head. This will provide lubrication to the quill.
Twice a Month:
Apply 2 drops of oil in upper cup on front of head with sae 30 oil. This feed supply’s oil to the feed cradle for the power
quill feed to keep the grease pliable. If oil is not added, the grease on the feed cradle will thicken and this makes it
difficult to engage the power quill feed.
WARNING!
Do not overfill this oil cup as excess oil could wash down into the upper spindle
bearings and wash away the grease.
