28
TRAK Machine Tools
Southwestern Industries, Inc.
32240 - Printer and MMS - Installation & Printing Guide
4.3.5.4
Cooldown
On the LCD Screen:
1.
From the Info Screen go to:
Main Menu
>
Prepare Menu
>
Cooldown
2.
The Cooldown function will set the Target
Temperatures of nozzles, print bed and
print chamber to 0°C.
The actual temperature will generally stay
around 20-25°C (depending on where you
are located), and stop the cooldown
function once it has hit room temperature.
Target Temperature is set to 0°C
4.3.5.5
Move Axis
On the LCD Screen:
1.
From the Info Screen go to:
Main Menu
>
Prepare Menu
>
Move
Axis
2.
Select the incremental amount that you
want to move the axis by.
3.
Select the axis you want to move.
CAUTION!
ALWAYS move the Z axis down, before moving
the X/Y axes. Not moving the Z axis down may
result in the nozzles scratching the build plate.
4.
The printer will now start to move in the positive direction that you selected. To reset, use the
Auto-Home function.
4.3.5.6
Disable Steppers
On the LCD Screen:
1.
From the Info Screen go to:
Main Menu
>
Prepare Menu
>
Disable Steppers
2.
Now you can manually move the print head around the build plate. To enable steppers again,
use the Auto-Home function.
NOTE
–
When steppers are disabled, always keep an eye on the nozzle height, or you could
potentially scratch the build plate.
