2
TRAK Machine Tools
Southwestern Industries, Inc.
TRAK TRL Lathe, ProtoTRAK RLX CNC Safety, Installation, Maintenance, Service & Parts List
1.0 Safety Specifications
The safe operation of the TRAK TRL Lathe & ProtoTRAK RLX CNC depends on its proper use and the
precautions taken by each operator.
Read and study the TRAK TRL Lathe & ProtoTRAK RLX CNC Safety, Programming, Operating, and
Care Manual. Be certain that every operator understands the operation and safety requirements of
this machine
before
its use.
Read and study the TRAK TRL Lathe Safety, Installation, Maintenance, Service & Parts List Manual.
Be certain that every operator understands the operation and safety requirements of this machine
before
servicing.
Always wear safety glasses and safety shoes.
Always stop the spindle and check to ensure the CNC control is in the stop mode before changing or
adjusting the tool or workpiece.
Never wear gloves, rings, watches, long sleeves, neckties, jewelry, or other loose items when
operating, or around the machine.
Use adequate point of operation safeguarding. It is the responsibility of the employer to provide
and ensure point of operation safeguarding per ANSI B11.6-2001.
1.1 Safety Publications
Refer to and study the following publications for assistance in enhancing the safe use of this machine:
Safety Requirements for Manual Turning Machines with or without Automatic Control (ANSI
B11.6-2001). Available from the American National Standards Institute, 1819 L Street N. W.,
Washington, D.C. 20036.
Concepts And Techniques Of Machine Safeguarding (OSHA Publication Number 3067).
Available from The Publication Office - O.S.H.A., U.S. Department of Labor, 200 Constitution
Avenue, NW, Washington, DC 20210.
All other regulations are specific to the State in which the machine is installed.
1.2 Danger, Warning, Caution, and Note Labels and Notices as Used In This
Manual
DANGER
- Immediate hazards that
will
result in severe personal injury or death. Danger labels on
the machine are red in color.
WARNING
- Hazards or unsafe practices that
could
result in severe personal injury and/or damage
to the equipment. Warning labels on the machine are gold in color.
CAUTION
- Hazards or unsafe practices that
could
result in minor personal injury or
equipment/product damage. Caution labels on the machine are gold in color.
NOTE
- Call attention to specific issues requiring special attention or understanding.
