Page 10
TEF 4600 CONTROL SYSTEM -
INSTALLATION AND USER MANUAL
10.3.5 Local Remote Mode Enable
If there are two touch panels or one touch panel and
onePC running the HMI application there is the option
to use Local/Remote mode. When activated the Local
or Remote panel must use the “Take Control” button to
control the Helideck lights. When not in control a panel
will only be able to monitor the status of the Helideck
lights. If the remote panel does not have control and an
attempt is made to turn on a light circuit “Take Control”
button will display the following text: “ Local panel has
control”.
10.3.6 Panel is local
Enable this if the Panel is local.
10.3.7 Panel is remote
Enable this if the Panel is remote.
10.3 Setup screen, page 3
