background image

Tranberg AS | P.O. Box  8033 | N-4068 Stavanger | Norway | Tel.: (47)51 57 89 00 | Fax.: (47)51 57 89 50
E-mail: info@tranberg.com | www.tranberg.com
Tranberg Systems | Hjulmagervej 15C | 7100 Vejle |  Denmark |  Tel.: (45) 75 85 83 80
E-mail: mail@tranbergsystems.com |  www.tranbergsystems.com

TEF D620 Ex d / Ex e
TEF D621 Ex d / Ex e

IECE

X

 CABLE GLAND  USER MANUAL

IMPORTANT

Read this instruction carefully before installing the 
product

TUM 4720  REV

. C     11.08.2015

D620

D621

Summary of Contents for TEF D620

Page 1: ... tranberg com Tranberg Systems Hjulmagervej 15C 7100 Vejle Denmark Tel 45 75 85 83 80 E mail mail tranbergsystems com www tranbergsystems com TEF D620 Ex d Ex e TEF D621 Ex d Ex e IECEX CABLE GLAND USER MANUAL IMPORTANT Read this instruction carefully before installing the product TUM 4720 REV C 11 08 2015 D620 D621 ...

Page 2: ...sk Be certain to follow codes regulations and or specific procedures that are related to the installation The product is not intended to be repaired The sealing ring and entry threads contain flamepaths and shall not be repaired but replaced with spare parts from Tranberg AS TOOLS REQUIRED Wrench according to size of cable gland MAINTENANCE INSTRUCTIONS The product should be inspected according to c...

Page 3: ... lock nut inside box Refer list on next page for correct tighten ing torque Pass compression nut 1 over the cable Pass washer 2 then sealing ring 3 over the cable Carefully cut back the outer sheet of the cable as shown on drawing Feed conductors through gland body 4 Conductors and outer sheath goes through the connector 4 and into enclosure Press sealing ring 3 and Washer 2 into gland body 4 by h...

Page 4: ... Silicone sealing and gasket Tightening torque Compression nut Sealing ring code Torque Nm Clamping Range Sealing ring code Clamping Range A1 7 A1 2 0 6 0 mm B1 7 B1 5 0 9 1 mm B2 10 B2 4 5 7 5 mm C1 5 C1 9 0 14 3 mm C2 10 C2 7 0 10 0 mm C3 12 C3 8 5 13 0 mm D1 10 D1 15 0 20 0 mm D2 10 D2 11 0 15 0 mm D9 10 D9 13 0 17 0 mm E1 30 E1 22 0 26 5 mm E2 30 E2 18 0 24 0 mm F1 30 F1 26 5 32 4 mm T1 30 T1 ...

Reviews: