32
TK 56117-6-OP-EN
Specifications
Engine Specifications
Engine
Thermo King TK 270VF
Fuel Type
Use Diesel Fuel only
No. 2 diesel fuel under normal conditions
No. 1 diesel fuel is acceptable cold weather fuel
* Refer to Service Bulletin SB537 for acceptable bio-diesel fuel blends.
Oil Capacity
Crankcase and filter: 3.1 quarts (2.9 liters)
Fill to full mark on dipstick
Oil Type:
Mineral Oil
Synthetic Oil
API Classification CJ-4 (or better)
API Classification CJ-4 (or better)
Oil Viscosity
** Factory Fill
5 to 122 F (–15 to 50 C): SAE 15W-40
–13 to 104 F (–25 to 40 C): SAE 10W-40
–20 to 86 F (–29 to 30 C): SAE 10W-30**
–22 to 32 F (–30 to 0 C): SAE 5W-30
Cooling System Capacity
KK450 HO: 4.4 quarts (4.2 liters)
HK450 MAX: 8.7 quarts (8.2 liters)
Engine Coolant Type
Factory filled with Chevron Delo® XLC extended
life coolant (ELC).
55/45 gylcol/water concentration
Freeze protection of -40°F/ -40°C
Compatible coolants:
Chevron Delo® XLC
Havoline Delo® XLC (Europe)
Caltex Delo® XLC (Asia)
OR Meets the performance requirements of both
ASTM D6210 and ASTM D3306
OAT extended life coolant, nitrite free
Important:
Only OAT extended life coolants (Chevron Delo® XLC or equivalent) should
be added to Thermo King systems. Conventional coolants should not be used
(Typically identified by green or blue-green color). If a conventional coolant is
combined with the Thermo King factory fill up to 25% by volume, the coolant
must be changed at the next service opportunity. Above 25%, the coolant
must be changed immediately. Conventional coolants dilute/interact with the
additive packages of extended life coolant which significantly reduces the
service life of the coolant.
Engine Thermostat
180 F (82 C)
Radiator Cap Pressure
15 psig (103 kPa)