5.4.2 Prefilters and / or bag filters in filter frame
Filters are supplied loose and have to be fixed by clips as follows:
1. Take the filter clips, which are included in the supply and are attached in brackets on the filter
frame (
2. Four filter clips have to be inserted in the respective brackets according to
3. Finally, the filter must be fixed by the clips in the filter frame (
Figure 85:
Delivery of the clips
Figure 86:
Insertation of the clips
Figure 87:
Fixed filter
Bag filters are installed similarly. Bags shells hang vertically.
5.4.3 Laterally removable bag filters with clamping mechanism
When inserting and fixing the laterally removable bag filters with clamping mechanism has to be
proceeded cautiously, so as not to damage them. The installation of laterally removable bag filters
must be carried out as follows:
1. First, move all levers of the clamping rails toward the door opening (
2. Slide one filter after the other in the filter frame (
3. Press the last filter of the row against the rear panel. Then press with the lever the filter cells
against the sealing (
Figure 88:
Loosen the clamps
Figure 89:
Slide in the filters
Figure 90:
Clamping the filters
Attention:
For soft bags the lower bags of the filter cells are to lift up in order to
prevent damage with the clamping system (
Summary of Contents for CCEB
Page 48: ...Figure 83 Pulling out the filters Figure 84 Pull out tool...
Page 74: ......
