Control Codes
POSjet
®
1500
Programmer's Guide
Page 158
Rev M
Nov-07
Station Select Commands
The following commands are used to load and position validation forms.
Function
Select receipt station
ASCII
[ESC] f
Hexadecimal
1BH 66H
Decimal
<27><102>
IPCL
&%SR
EPOS
[ESC] c 0 <n>
Description
This command ejects a form, if present, and enters receipt mode. All subsequent data will be
printed on the receipt.
Function
Select validation station
ASCII
[ESC] j
Hexadecimal
1BH 6AH
Decimal
<27><106>
IPCL
&%VS
EPOS
[ESC] c 0 <n>
Description
This command requests that a form be inserted in the printer. The
Indicator will blink until
the form is loaded. When the printer senses the form, it automatically feeds it into the proper
position and all subsequent data is printed on the form. If the “FORM” key is pressed while the
printer is waiting for a form, the printer will enter receipt mode and print the validation
information on the receipt.
Note:
The form position is determined by the programmable slip stop. See the [ESC] [EM]L command
for setting the slip stop.
Note:
This command may be configured with a time out. See [ESC][EM]C for details.
Note:
An ENQ <16> will force the printer to stop waiting for a form and return to receipt mode.
Function
Select validation station to N lines
ASCII
[ESC] k <n>
Hexadecimal
1BH 6BH <n>
Decimal
<27><107> <n>
IPCL
&%VL
EPOS
Description
This command sets the validation stop to <n> lines and then requests that a form be inserted in the
printer. The
Indicator will blink until the form is loaded. When the printer senses the form,
it automatically feeds it into the proper position and all subsequent data is printed on the form. If
the “FORM” key is pressed while the printer is waiting for a form, the printer will enter receipt
mode and print the validation information on the receipt.
Note:
This command may be configured with a time out. See [ESC][EM]C for details.
Note:
An ENQ <16> will force the printer to stop waiting for a form and return to receipt mode.
Summary of Contents for POSJET 1500
Page 1: ...PROGRAMMER S GUIDE POSjet 1500 PN 20 03398 Rev M Nov 2007...
Page 14: ......
