Programmer's Guide
POSjet
®
1500
EPOS Control Codes
Nov-07
Rev M
Page 239
Ithaca
®
Specific POSjet
®
Commands
The POSjet
®
1500 has a number of extended control commands designed to make operation and maintenance of the
printer easier for the host application refer to the POSjet
®
extended control discussion on page 240.
Panel Button Commands
Function
Enable/Disable Paper Feed
ASCII
[ESC] p 5 <n>
Hexadecimal
1BH 70H 35H <n>
Decimal
<27> <112> <53> <n>
Range
0
≤
n
≤
255
Description
The [ESC] c 5 <n> command enables or disables the
Button.
Where <n>
Bit 0 = 1 the
Button is disabled
Bit 0 = 0 the button is enabled.
Paper Out/Low Sensor Commands
Function
Paper Low Sensor
ASCII
[ESC] p 4 <n>
Hexadecimal
1BH 70H 34H <n>
Decimal
<27> <112> <52> <n>
Range
0
≤
n
≤
255
Description
The [ESC] c 4 <n> command determines if the printer stops printing when paper low is detected.
Where <n>
0 Printer continues to print with paper low.
1 Printer stops printing when paper low is detected.
Function
Paper Error Signal Control
ASCII
[ESC] p 3 <n>
Hexadecimal
1BH 70H 33H <n>
Decimal
<27> <112> <51> <n>
Range
0
≤
n
≤
255
Description
The [ESC] c 3 <n> command controls how the paper error pin on the parallel interface operates.
Where <n> Bit 0 controls paper low operation.
If Bit 0 = 1 Paper low will set the paper error pin.
If Bit 0 = 0 Paper low will not effect the paper error pin.
Bit 2 controls how paper out effects the paper error pin.
If Bit 0 = 1 Paper out will set the paper error pin.
If Bit 0 = 0 Paper out will not effect the paper error pin.
Note:
The paper out sensor will always stop printing.
The default setting allows only paper out to control the paper error pin.
The Epson section has the following description of the enable/disable paper feed command.
Description
The [ESC] c 5 <n> command enables or disables the
Button. When the least significant bit
(LSB) of <n> = one, the
Button is disabled; when it is zero, the button is enabled.
Summary of Contents for POSJET 1500
Page 1: ...PROGRAMMER S GUIDE POSjet 1500 PN 20 03398 Rev M Nov 2007...
Page 14: ......