Control Codes
POSjet
®
1500
Programmer's Guide
Page 52
Rev M
Nov-07
Signal ink low when x% of the ink has been
used.
Ink Low is OFF (never signal ink low)
Ink Low when at 75%
Ink Low when at 80%
Ink Low when at 85%
Ink Low when at 90%
Ink Low when at 95%
•
Ink Low When
At:
Ink Low when at 100%
This sets the point when the
printer reports ink low. The
printer does not stop printing
at ink low
Normal 2.5”
•
Print Zone
Simulated 2.8”
This is accomplished by
shrinking the character
spacing.
Vertical Control
The line spacing can be defaulted to
6 or 8 lines per inch (lpi).
This is not available in and
TM-U325 mode
6 lpi
This is the default for most
Epson printers
Line Spacing
8 lpi
•
An auto line feed feature can be set as a default
where all [CR]’s have a [LF] added. In
addition, a CR is added to a LF, and the CR
or LF can be configured to be ignored.
Setting Depends
on emulation.
Normal CR/LF actions. Both are processed.
Ignore all LF characters
Ignore all CR characters
Default for most Epson
printers.
Add a LF to all CR characters
Add a CR to all LF characters
•
Auto
Line Feed/
Carriage
Return
Add a CR to all LF characters,
and add a LF to all CR characters
The default page length can be set to various
lengths from 2 to 60 lines. Page length
configuration affects how the [FF] command
operates.
Page length can be set in
PcOS, M50, And Microline
only.
Page Length
2 to 60 lines
40
Fonts
The default print mode can be set to 12 x 12
draft, 12 x 14 large draft, or 24 x 32 NLQ
modes.
This is not configurable in all
emulations.
12 x 12 draft
•
12 x 14 large draft
Font
24 x 32 NLQ
The default print pitch can be set to 8, 10, 12,
15, 17.1, 20, or 24 characters per inch.
PcOS Only
8 cpi
10 cpi
12 cpi
15 cpi
17.1 cpi
PcOS
20 cpi
Pitch (CPI)
24 cpi
Summary of Contents for POSJET 1500
Page 1: ...PROGRAMMER S GUIDE POSjet 1500 PN 20 03398 Rev M Nov 2007...
Page 14: ......
