Chapter 1: Introduction To The TI-1500B Digital Indicator
TI-1500B indicator is always used in many industrial fields, such as measuring
martial performance, measuring peak value, checking resistance strain gauge load cell
and so on. It is industrial class digital indicator. This mode operates identically, can
readout up to 100,000 display divisions. It has 10/80Hz (Option) A/D converting frequent,
four absolute channels. All setup parameters may be entered via the front panel keys,
including calibration.
If your Model TI-1500B digital indicator is part of a complete force gauge or has
been installed for you, you may skip to Chapter 7 for operating instructions. Prior to using
the indicator, please read this chapter carefully and completely. Store the manual in a safe
and convenient place so it will be available if you have questions concerning the operation
of the scale.
If you are an installer, the indicator’s installation and wiring instructions are found in
Chapter 2. The indicator contains two main setup menus: The Setup ( “F” ) menu, which
configures the indicator to your force gauge’s platform and the User ( “A” ) menu, which
configures the serial communication port and enables some user options. Chapter 3 gives
an overview and explains how to use the five front panel keys to maneuver and save
settings in both menus. Chapters 4 and 5 explain the Setup and User Menu options,
respectively. Chapter 6 covers system calibration. Prior to installing the indicator, please
read this manual carefully and completely. Store the manual in a safe and convenient
place so it will be available if you have questions concerning the setup and operation of
the force gauge.
Figure 1-1: TI-1500B Front Panel
