BIOS SETUP
24
•
Landing Zone: Landing zone
•
Sector: Number of sectors
•
Drive A/Drive B
Select the correct types of diskette drive(s) installed in the computer.
−−−−−
None: No diskette drive installed
−−−−−
360K, 5.25 in.: 5-1/4 inch standard drive; 360 kilobyte capacity
−−−−−
1.2M, 5.25 in.: 5-1/4 inch high-density drive; 1.2 megabyte capacity
−−−−−
720K, 3.5 in.: 3-1/2 inch double-sided drive; 720 kilobyte capacity
−−−−−
1.44M, 3.5 in.: 3-1/2 inch double-sided drive; 1.44 megabyte capacity
−−−−−
2.88M, 3.5 in.: 3-1/2 inch double-sided drive; 2.88 megabyte capacity
•
Video
Select the type of primary video subsystem in your computer. The BIOS will detect the
correct video type automatically. The BIOS supports a secondary video subsystem, but
do not select it in this Setup.
−−−−−
EGA/VGA: Enhanced Graphics Adapter/Video Graphics Array. For EGA, VGA,
SEGA, SVGA or PGA monitor adapters.
−−−−−
CGA 40: Color Graphics Adapter, powers up in 40-column mode.
−−−−−
CGA 80: Color Graphics Adapter, powers up in 80-column mode.
−−−−−
MONO: Monochrome adapter, including high resolution.
•
Halt On
During POST, the computer stops if the BIOS detects a hardware error. You can set the
BIOS to ignore certain errors during POST and continue the boot-up process. The
following are the available selections.
−−−−−
All Errors: If the BIOS detects any non-fatal errors, POST stops and prompts you
to take corrective action.
−−−−−
No Errors: POST does not stop for any error.
−−−−−
All, But Keyboard: If the BIOS detects any non-fatal errors except keyboard, POST
stops and prompts you to take corrective action.
−−−−−
All, But Diskette: If the BIOS detects any non-fatal error except floppy disk drive,
POST stops and prompts you to take corrective action.
−−−−−
All, But Disk/Key: If the BIOS detects any non-fatal error except floppy disk drive or
keyboard, POST stops and prompts you to take corrective action.
Transcend Information, Inc.
