3
the process.
Driver Installation for Mac OS 9.x
1. Power on the computer to which you will connect the
6-in-1 Card Reader
and make sure
the USB port is enabled and working properly. (
Do not plug your
6-in-1 Card Reader
into
the USB port at this time
).
2. Insert the Driver CD into the CD-ROM drive and run the
Install
program under the
Mac
folder on the Driver CD.
3. Restart the computer to complete the installation process.
To Use the 6-in-1 Card Reader
MultiMediaCard and Secure Digital Card use the same slot on the
6-in-1 Card Reader
.
Only one type of memory cards can be used in this slot at a time.
To Use with Windows 98/98SE and 2000
1. Complete the driver installation.
2. Connect the
6-in-1 Card Reader
to an available USB port via the USB extension cable.
3. Your computer automatically recognizes the
6-in-1 Card Reader
and shows the “
New
Hardware Found
” message boxes. Windows installs the files needed to use your device.
