2
Operation
Battery Installation
Remove screws from back cover using a Phillips style screw
driver and detach from monitor. Insert the included 9 volt
battery, replace back cover and secure with screws.
Only new and valid batteries can be used.
Low battery power is indicated when the last Red LED
flashes during measurement. Stop testing and replace
with fully charged 9v battery.
Measuring Surface Resistance
1. To measure the surface resistance of an object, hold the
instrument to the surface and press the TEST” button.
2. The value is indicated by colored LED lights.
3. Refer to “LED Indication Guide” on Page 4 for LED.
Other Measurements
By connecting the optional SR0055,Surface Resistance
Probes, it’s possible to measure other forms of resistance
such as “point to point” resistance ,or “volume resistance”.
Contact Transforming Technologies for Surface Resistance
Probes, Model number: SR0055.
