Transition Networks
E-MCR-05 User Guide
33392 Rev. C
Page 4 of 12
Install Shelf Support Panel to Media Converter(s)
The E-MCR-05 comes with 12 self-support panels that must be mounted to each media converter before it can
be installed.
1.
Set the media converter on its bottom as shown below.
2.
Remove the two (2) screws securing the cover to the media converter.
3.
Position the shelf support panel as shown below.
4.
Insert the two screws as shown below and tighten to secure to the media converter.
Install Media Converters into E-MCR-05
1.
Position the media converter in the E-MCR-05 as shown below and then carefully slide it into the slot.
2.
Tighten the panel fastener located directly under the media converter to secure it to the E-MCR-05.