Transition Networks
E-MCR-05 User Guide
33392 Rev. C
Page 7 of 12
Maintenance
Replace Fuse
Description: FUSE, 4A, 250V, 5X20MM, FAST-BLO. See
on page
1.
Turn the power rocker switch to the OFF position (O) as shown below.
2.
Remove the power cord from the power supply of the E-MCR-05.
3.
Insert a small flat-blade screwdriver at the fuse holder as shown below and pull or carefully pry outward to
dislodge the fuse holder.
4.
Remove the fuse from the fuse holder.
5.
Install a new 4A fuse “ONLY” into the fuse holder.
6.
Install the fuse holder into E-MCR-05.
7.
Plug the power cord into the E-MCR-05 AC power inlet.
8.
Press the power switch to the ON position (I) and media converter power LEDs should turn ON.
