Ethernet™ 2-Port
14
5
Multi Media Repeater
Connecting Power to Multi Media Repeater
To power ON the Multi Media Repeater:
1. Locate the power receptacle on the back of the Multi Media
Repeater.
2. Connect the Multi Media Repeater power connector end of
the power supply adapter to the Multi Media Repeater.
3. Connect the external power connector end of the power
supply adapter to external AC power.
NOTE: After the power supply adapter is connected to the Multi
Media Repeater and to external power, the green Power LED is
illuminated.
Ensuring Correct Segment Number
When connecting Pockets, the transmission path between any two Data
Terminating Equipment (DTE) terminals can consist of no more than
five segments. (A segment is the cable connection between cable
interfaces in an Ethernet LAN.)
NOTE: Up to one-hundred 10Base5 connections can be made in one
segment.
To assign segment numbers to cable connections:
1. Determine the two terminals in the network which are separated by
the greatest number of segments.
2. Assign a segment path between the terminals by labeling the cable
connected to one of the terminals “segment 1” and the segment
connected to the other terminal “segment n” (n = total number of
segments
≤
5).
3. Verify that no segment paths contain more than n segments by
assigning segment paths and numbers to all other terminals.
Ethernet™
2 Port Multi Media Repeater
n
e
t
w
o
r
k
s
T R A N S I T I O N
Mpls, MN 55344
Ethernet™
2 Port Multi Media Repeater
n
e
t
w
o
r
k
s
T R A N S I T I O N
Mpls, MN 55344
Ethernet™
2 Port Multi Media Repeater
n
e
t
w
o
r
k
s
T R A N S I T I O N
Mpls, MN 55344
Ethernet™
2 Port Multi Media Repeater
n
e
t
w
o
r
k
s
T R A N S I T I O N
Mpls, MN 55344
2
3
4
5
1
3
4
