31
CPSMC19xx-100 PointSystem
™
Chassis
netw
ork
mgmt.
24-hour Technical Support:
1-800-260-1312
-- International:
00-1-952-941-7600
5
Network Management
The CPSMM100 firmware and the
FocalPoint™
application are described in the
FocalPoint™
2.0 Management Application and CPSMM100 Firmware
user’s guide
(P/N 33293). This manual is included on the application CD and is also available
on-line at www.transition.com.
Transition Networks CPSMM100 firmware is embedded in the optional manage-
ment modules (see section 2.2). The firmware allows the network administrator to
configure and manage the CPSMC19xx-100 chassis from an attached terminal or
from a remote, networked computer.
The firmware includes the Transition Networks
Command Line Interface
(CLI), a
tel-
net server
, a
Web browser
, and an
SNMP
(Simple Network Management Protocol)
agent.
In addition, Transition Networks
FocalPoint™
application
can be installed in the
networked computer to provide a graphical user interface to monitor the
PointSystem™
chassis.
Hardware Connections
Network management can be implemented either through the DB-9 serial port or
through the RJ-45 Ethernet port of the management modules.
10BASE-T
RX
TX
LNK
PWR
RESET
SERIAL
CPSMM120
10BASE-T
IN
CPSMM200
OUT
RX
TX
LNK
PWR
RESET
DB-9
RJ-45 Ethernet Port
CPSMM-200
CPSMM-120
DB-9 Serial Port
