User’s Guide
SIBTF10xx-1xx-MR & SIBTF10xx-1xx-MS
Substation-Rated Industrial Ethernet Switch
•
10/100Base-TX to 100Base-FX
•
Single or Redundant Wide Input Power
Supply
The SIBTF10xx-1xx-Mx Ethernet industrial switches
allow connecting 10Base-T Ethernet/100Base-TX fast
Ethernet twisted-pair copper network devices to
network devices on a 100Base-FX fast Ethernet fiber
network.
The SIBTF10xx-140-MR has four RJ-45 copper ports
and one fiber port. The SIBTF10xx-140-MR model includes redundant power-supply
terminal blocks that can handle 48–170VDC or 90–125VAC, 50/60Hz input power. The
SIBTF10xx-140-MS model, not shown, has a single power-supply terminal block (TB).
Available Models . . . . . . . . . . . . .2
Installation . . . . . . . . . . . . . . . . . .4
Operation . . . . . . . . . . . . . . . . . .15
Cable Specifications . . . . . . . . . .20
Technical Specifications . . . . . . .22
Troubleshooting . . . . . . . . . . . . .24
Contact Us . . . . . . . . . . . . . . . . .26
Compliance Information . . . . . . .27
The SIBTF10xx-130-MR has three RJ-45 copper ports
and two fiber ports. The SIBTF10xx-130-MR model
includes redundant power-supply terminal blocks that
can handle 48–170VDC or 90–125VAC, 50/60Hz
input power. The SIBTF10xx-130-MS model, not
shown, has a single power-supply terminal block (TB).
The SIBTF10xx-110-MR has one RJ-45 copper port
and one fiber port. The SIBTF10xx-110-MR model
includes redundant power-supply terminal blocks that
can handle 48–170VDC or 90–125VAC, 50/60Hz
input power. The SIBTF10xx-110-MS model, not
shown, has a single power-supply terminal block (TB).
140-MR
110-MR
130-MR
