Installation -- Continued
SPS-1872-CC
(Conversion Center™)
1.
Remove the left-rear and right-rear screws from the
Conversion Center™
media converter.
2.
Connect the barrel connector on the SPS-1872-CC to the power port of
the media converter The flange of the SPS-1872-CC should slide over
the rear of the media converter as the two devices are connected. The
screw holes on the left and right sides should align.
3.
Secure the two devices together by replacing the two screws on either
side of the SPS-1872-CC.
SPS-1872-PS
(PointSystem™)
1.
Remove the left-rear and right-rear screws from the
PointSystem™
media
converter.
2.
Connect the barrel connector on the SPS-1872-PS to the power port of
the media converter. The flange of the SPS-1872-PS should slide over the
rear of the media converter as the two devices are connected. The screw
holes on the left and right sides should align.
3.
Secure the two devices together by replacing the two screws on either
side of the SPS-1872-PS.
4
24-Hour Technical Support:
800-260-1312
-- International:
952-941-7600
SPS1872-xx
SPS-1872-PS
TN PointSystem
media converter
SPS-1872-CC
TN Conversion Center
media converter
techsupport@transition.com
-- Click the
“Transition Now”
link for a live Web chat.
5
Installation
-- Continued
SPS-1872-DPS
(Dual PointSystem™)
1.
Remove the left-rear and right-rear screws from the Dual
PointSystem™
media converter.
2.
Connect the barrel connector on the SPS-1872-DPS to the power port of
the media converter. The flange of the SPS-1872-DPS should slide over
the rear of the media converter as the two devices are connected. The
screw holes on the left and right sides should align.
3.
Secure the two devices together by replacing the two screws on either
side of the SPS-1872-DPS.
SPS-1872-DPS
TN Dual PointSystem
media converter
