P a g e
|
11
2.6
WIRE’S CONNECTION
2.6.1
POWER CORD CONNECTION
The power socket is located on the right of rear panel, and the power switch is on the left of
front panel. User can plug one end of the power cord to the socket and insert the other end to
AC power. When the device solely connects to protective ground, it should adopt independent
way, say, share the same ground with other devices. When the device adopts united way, the
grounding resist
ance should be smaller than 1Ω.
Caution
: Before connecting power cord to TL-2500 SERIES 32 in 1 IP to Analog Modulator,
user should set the power switch to “OFF”.
2.6.2
SIGNAL AND NMS CONNECTION
The signal connections include the connection of input signal cable and the connection of output
signal cable. The details are as follows:
TL-2500 SERIES 32 in 1 IP to Analog Modulator Cable Illustration:
➢
RF Output Cable Illustration:
➢
NMS Cable illustration (CAT5):
Summary of Contents for TL-2500 Series
Page 6: ...P a g e 6 ...
Page 25: ...P a g e 25 ...