3
2: sAFeTY RULes &
WARNINGs
2.1
Read all instructions in this manual before using
this tester. Failure to do so may result in damage to the
tester or injury to the user.
2.2
Do not use this tester with it`s case open, or with
parts removed. Doing so may damage the tester and /
or injure the user.
2.3
When using this tester in schools and workshops,
responsible teachers or skilled personnel must control
the usage of this tester. Failure to observe this precau-
tion may result in damage to the tester or injury to the
user.
2.4
Follow the recommendations of any Trade Organiz-
ations or Regulatory Agencies whose scope encom-
passes the use of this tester. Failure to do so may
result in damage to the tester or injury to the user.
2.5
Do not open this tester for maintenance without
first disconnecting it from all external circuitry. Failure
to observe this precaution may result in damage to the
tester or injury to the user.
2.6
Repairs and maintenance must only be carried out
by qualified service personnel or qualified electricians /
technicians who know the dangers of, and the safety
rules applicable to this type of equipment. Failure to
observe this precaution may result in damage to the
tester or injury to the user.
2.7
Do not touch the ends of the cables when making
tests. An unexpected dangerous potential may be
present. Failure to observe this precaution may result
in damage to the tester or injury to the user.
2.8
Do not apply voltage or current to any of the tes-
ter‘s connectors. Doing so may damage the tester and
/ or injury the user.
WARNING
This tester is not intended for use on
powered circuits. Attaching this tester to
a powered circuit can result in damage to
the tester or injury to the user.
CNT10L_Manual_en.indd 3
25.06.2019 14:19:12
