ICE-‐LOCK
INSTALLATION MANUAL
Page 18
9.3.2 Table of parameters
Name
Comment
PIN1
PIN access code 1.
PIN2
PIN access code 2.
PIN3
PIN access code 3.
…
PIN48
PIN access code 48.
PIN49
PIN access code 49.
PIN50
PIN access code 50.
Table 7: Entering PIN access code parameters
Example:
♦
Direct programming on the SIM card
ICE-LOCK PROGRAMMING TABLE
SIM CARD PHONE BOOK
Name
Number
Description
PIN1
3369
PIN access code 1.
PIN12
1234
PIN access code 12.
Table 8: Entering PIN access codes example
♦
Remote programming by SMS
;PIN1=3369;PIN12=1234;
NOTE
PINx access codes must be 4 digits long, and must start with number
greater or equal 1.
9.3.3 Using the keypad for activating the Output – opening the doors
The user presses the 4 digit PIN access code and then presses the ’
#
’
key on the keypad to confirm the entry. If the code is correct, the output relay is
activated which triggers the electric lock, ramp, bollard, sliding doors, etc…
Example:
♦
Typing the PIN access code on the keypad
For PIN1 type 3369 and press
’#’
. If the code is correct you will
hear long beep confirmation, if the PIN access code is incorrect you
will hear 3 short beeps.
