1800 816 277
www.tti.com.au
13
Product HandBook
SpotPro
™
CAUTION! The engine must be inspected and prepared in accordance with
the manufacturer. Failure to fulfil this requirement may void the engine’s
warranty.
•
Prepare the pump engine in accordance with the Honda manual supplied with your SpotPro unit. Fill the
fuel tank with fresh unleaded petrol.
•
Where the optional spray boom is ordered (refer to Figure 5), install it to the vehicle and connect the hose
to the manually operated valve at the pump manifold.
•
It is recommended that at first use, the SpotPro is filled with water for spray boom calibration purposes
and for the operator to become familiar with the characteristics of the unit.
Figure 5 – Spray Boom Arrangement
Filling the SpotPro Tank
WARNING! Ensure the filling area is in an open, well ventilated space if
filling with chemicals. Follow the instructions provided with the chemicals
or the applicable Safety Data Sheet.
Mixing and filling the SpotPro should be undertaken at a carefully chosen site, away from any risk of spillages
draining into water courses or into environmentally sensitive areas. Children and animals must always be kept
away from mixing and filling operations.
The unit’s tank is filled as follows:
•
Open the tank filler by twisting and lifting the cap.
•
Withdraw the internal basket strainer and inspect it for any debris. Clean it if required and reinstall it into
the top of the tank.
