1800 816 277
www.tti.com.au
16
Product HandBook
SpotPro
™
Figure 7 – Petrol Pump Details
•
Once the engine starts, slowly move the choke lever to the open position.
•
When the engine has warmed up, slowly increase the engine speed to a medium setting, which should
result in the required performance while minimising the fuel consumption and excessive engine noise.
•
When the engine needs to be stopped, press the red STOP button adjacent to the engine throttle lever.
CAUTION! Ensure the engine’s grease cups are turned in every two hours of
engine operation.
•
Check the two grease cups located at the back of the pump, refer to Figure 8. Rotate the grease cups 2-3
turns clockwise every two (2) hours of operation. Once the grease caps are fully wound in, undo and refill
with general purpose grease.
Figure 8 – Petrol Pump’s Grease Cups
