1800 816 277
www.tti.com.au
20
Product HandBook
SpotPro
™
•
Ensure that the tank’s basket strainer is free from chemical residue or debris.
•
Nozzles, nozzle filters, nozzle caps and gaskets should be cleaned by soaking in water, brushing with a
nozzle brush and allowed to dry. Do not blow through the nozzles or use wire or pins to clear any blockages.
If the SpotPro is to be stored for an extended period, thoroughly clean and decontaminate the unit as
described above. Ensure it is allowed to dry, the tank and all lines empty and not pressurised then store it in a
well ventilated area.
Maintenance
Your SpotPro Spray Unit requires minimal maintenance but regular cleaning and checks will ensure safe and
reliable service over its lifetime. Periodic checks and inspections will identify any potential issues, enabling
timely rectification and minimising downtime.
Periodic Checks
The following checks and cleaning operations should be undertaken on a regular basis (at least annually).
The frequency of these activities will depend on the nature of the operating environment and the operational
hours of the Storm unit.
•
Clean the unit and inspect it for any signs of damage or wear. Replace any safety labels if they are damaged
or illegible.
•
Check all fittings are firmly secured, tighten if necessary.
•
Unwind the hose from the reel fully to check that hose is in good order. Pressurise the line and check
operation of spray gun nozzle. Rewind the hose onto the reel, ensuring it retracts all the way.
•
Check the engine’s oil level weekly. Top up if required.
•
Check for any signs of fuel or oil leaks around the engine. If detected, investigate and rectify.
•
Check the engine fuel line filter, clean or replace as necessary.
•
Clean the engine’s air filter regularly, especially if working in a dusty environment.
•
If the SpotPro is to be stored for an extended period, thoroughly clean and decontaminate the unit as
described above. Ensure it is allowed to dry, the tank and all lines empty and not pressurised then store it
in a well ventilated area.
Maintenance Schedule
The following tasks are be conducted in accordance with each of the schedules. All scheduled tasks are to
be undertaken concurrently. For example, at the three month maintenance interval, all task listed are to be
undertaken, in addition to the daily, weekly and monthly tasks.
NOTE! Maintenance is important. Keep a record of all maintenance tasks
conducted on the SpotPro unit.
TTi recommends photocopying these schedules in order to keep a detailed log of all maintenance tasks. A
copy of these schedules will be required to support any warranty claim.
