1800 816 277
www.tti.com.au
22
Product HandBook
SpotPro
™
Twelve Monthly tasks
The following tasks are to be undertaken every twelve months or 200 operating hours, whichever occurs first.
No.
Task
Date
Signed
1
All Daily, Weekly, Monthly, 3-Monthly & 6-Monthly tasks
2
Replace the petrol engine’s air filter
3
Drain and flush the fuel tank
4
Replace the engine’s fuel filter
5
Replace the spark plug
Two-Yearly tasks
The following tasks are to be undertaken every 24 months or 500 operating hours, whichever occurs first.
No.
Task
Date
Signed
1
All Daily, Weekly, Monthly, 3-Monthly, 6-Monthly and
12-Monthly tasks
Maintenance Tasks
The following tasks must be undertaken on a periodic basis to ensure your SpotPro’s ongoing reliability.
CAUTION! In dusty, dirty or smoky environments, cleaning, inspection and
servicing of the unit on a regular basis is essential. The cleaning, inspection
and servicing must be undertaken more frequently in harsh conditions to
avoid damage or destruction of equipment.
The frequency of these activities will depend on the nature of the operating environment and the operational
hours of the SpotPro but as a minimum, the following tasks should be undertaken annually.
Petrol Driven Pump
•
Refer to the supplied pump engine’s manual, drain and replace the engine oil in accordance with the
manufacturer’s recommendations.
•
Clean engine’s air filter regularly, especially if working in a dusty environment.
•
Unscrew the suction filter cover (refer to Figure 6) and remove the filter screen and gasket. Soak the filter
screen in clean water, brushing carefully with a nozzle brush. When re-assembling, ensure the gasket is
in position.
NOTE! Ensure the engine’s grease cups are turned in every two hours of
engine operation.
•
On the Honda GX35 engine, check the two grease cups located at the back of the pump, refer to Figure 8.
Rotate the grease cups 2-3 turns clockwise every two (2) hours of operation. Once the grease caps are
fully wound in, undo and refill with general purpose grease.
