1800 816 277
www.tti.com.au
8
Product HandBook
SpotPro
™
Suction Filter
Adjacent to the pump a filter is installed on the suction line. The filter has a removeable filter element for easy
cleaning.
Versatile Spray Boom
An optional 1.2m Versatile spray boom can be mounted to the back of the vehicle using the optional Hayman
Reece HitchIt attachment. The spray boom has three adjustable centre nozzles and two off-centre end jets
to provide a range of spray volumes and patterns, which can achieve a 4m width swath.
The spray boom is operated by a manual valve to start up or stop spray operations. When the valve is closed,
the fluid bypasses back into the tank.
Boomless Nozzle Kit
An optional brass boomless nozzle kit can be mounted to the optional HitchIt attachment, which fits any 50mm
Hayman Reece tow hitch. The nozzle is available in four sizes and is ideal for blanket spraying, especially in
rough country spraying and for locust control. By swapping nozzle plates, the nozzle can be used for either a
90 or 180-degree spray swath.
BoomTech Nozzle Kit
An optional BoomTech nozzle kit can be mounted to the vehicle or trailer with a tailgate bracket. The BoomTech
has two volume adjustable nozzles, ideal for fence lines, orchard, blanket and end row spraying.
Manually Operated Valve
A manually operated valve is fitted to feed to the spray boom. The valve switches from the hose reel feed to
the spray boom feed.
Frame
The chassis frame of the SpotPro Deluxe units is an all steel, fully welded construction and hot dip galvanised
for corrosion resistance.
Machine Limitations
The SpotPro is subject to operating limitations. It is the operator’s responsibility to ensure that this equipment
is being operated safely and within these limitations.
Driving Stability
The SpotPro unit is heavy when filled with fluid. To maintain stability while operating this unit:
•
Ensure the vehicle tyres are inflated to their correct pressure at all times. Underinflated tyres can
cause excessive lateral motion of the tyre, which may cause a rollover.
•
Allow extra room for braking and turning when the tank is full.
•
Ensure any side gradient (slope) is accounted for, especially when the SpotPro tank is full, as the
vehicle may have a higher centre of gravity.
