1800 816 277
www.tti.com.au
10
Product HandBook
SuperReel
™
Filling the SuperReel Sprayer Tank
CAUTION: Ensure the filling area is in an open, well ventilated space if filling with
chemicals. Follow the instructions provided with the chemicals or the applicable
Safety Data Sheet.
Mixing and filling the SuperReel sprayer should be undertaken at a carefully chosen site, away from any risk
of spillages draining into water courses or into environmentally sensitive areas. Children and animals must
always be kept away from mixing and filling operations.
The unit’s tank is filled as follows:
•
Open the tank filler by twisting and lifting the cap.
•
Withdraw the internal basket strainer and inspect it for any debris. Clean it if required and reinstall it into
the top of the tank.
•
Follow the chemical manufacturer’s instructions and safety precautions carefully, taking note of the
order in which the products are added to the tank.
•
Measure the correct quantities of chemicals using clean measuring containers specifically for this
purpose only, then add the chemicals to the tank.
•
Rinse out the measuring containers and any empty containers and pour all rinsing liquid into the
SuperReel sprayer’s tank.
CAUTION: Do not overfill the tank. This may result in chemical spillage.
CAUTION: The SuperReel sprayer must never be left unattended while being filled
with fluid.
•
Top up the tank with water to the required level, ensuring it is not overfilled. A sight tube is located on the
tank, providing a visual indication of the fluid level in the tank.
•
Thoroughly mix the contents by stirring with a suitable paddle or starting the pump with the hose
operation lever set to the BYPASS position.
•
Upon completion of filling the SuperReel sprayer tank, replace the filler cap and twist to tighten.
•
Wash off any spillage from outside the tank.
