Installation Manual
|
AC Edge 240
6
Factors Affecting Installation
Elevated Operating Ambient
If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than
room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum
ambient temperature specified by Transtector.
Reduced Air Flow
Installation of the equipment in a rack should be such that the amount of airflow required for safe operation of the equipment is not
compromised.
Mechanical Loading
Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to the uneven mechanical
loading.
Circuit Overloading Consideration
Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits
might have on over-current protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used
when addressing this concern.
Reliable Earthing
Reliable earthing of the rack-mounted equipment should be maintained. Particular attention should be given to supply connections
other than direct connections to the branch circuits (ACEG).
Disconnect Device
A readily accessible disconnect device should be incorporated in the building installation wiring.
Warnings
This product shall be installed and serviced only by qualified personnel. The product is intended for installation in a restricted access
area. Only use tools (for example, crimping tools, dies) and components (for example, breakers and wiring connectors) approved by
recognized agencies and authorities (for example, UL, TUV, NEC).
Hazardous Voltage. Multiple power sources may be available. Disconnect all power before servicing. Before connecting input power
cables make sure input power to panel is turned off. Read and understand these instructions before installing this product. If neces-
sary, contact Transtector for technical assistance: by phone at 1.800.882.9110 or 208.772.8515. Or email us at customerservice@
smithspower.com.
